From:Joseph A. Damiano
E-Mail:<dam1317@bellsouth.net>
Subject:RE: RE: KJ lower cases
Response to:529
Date:Thu Jan 29 20:07:17 2004


----- ORIGINAL MESSAGE FOLLOWS -----


----- ORIGINAL MESSAGE FOLLOWS -----
Russell,Congratulations on producing this much needed part.I
stalled one of these cases on a friends KL,after Russell
matched the trans mainshaft bushing threads to the upper
case.The workmanship is superb and the quality of the
casting is excellent. the case went into the frame with no
modification and is undetectable after matching to the
patina of the mateing case.am test riding this engine now
and no problems at all.  Ian Davidson>>>>>>>>>



     Thanks and glad to hear all is well with the lower
case.  I put alot of time into both patterns and tooling
fixtures, more time than it would have taken to build my KJ
basket case.  I will be pouring some more pans and gear
covers in February.

  I have found a new material for the front brake that looks
ery promising, I will let you know the results after
testing is complete.




Daer Mr. Hughes,


      I am currently rebuilding a 1930 Henderson KJ. I am
very interested in the lowercase you are manufacturing.
could you PLEASE contact me at your earliest convenience.  
E-mail @ dam1317@bellsouth.net, or contact by phone
(561-968-4016) during Mon-Fri. between 9:00 A.M. and 5:00
P.M. ET.


                            Sincerely,

                            Joseph A. Damiano