From:marty megregian e-mail:indianfourdoc@aol.com
Subject:RE: RE:RE:RE Seat Springs Date:Tue May 9 09:31:51 2006
Response to:1210
The deal with the seat springs is getting better all the time! What started this is both Steve and Toney while at Oley said they used opposite windings. Told this to Tom, and obviously he was torqued, since he tries to research everything to perfection prior to making anything. Now Steve ,per his message, is having second thoughts, and I passed that on to Tom. By the way, he [Tom] never knew about this site until last night! Just e mailed him the web address, so don't be surprised to see him chime in from now on. I'll also mention what I did to Tom, and that is anything E-X ever published can't be believed as gospel, considering the obvious misprints/lack of prints they did. There are many things not in the parts book, like the different headlights and 31 style parts, as well as a few other things. The fact that they describe the genny as DU-5, when the DU 5 turns the wrong way suggests they just made a mistake and took it from the Deluxe book, the owner's manual shows a three bolt carb, when KJ's were all two bolt, gives credance the the possiblity the spring part number could even be for a matched pair [it is theoretically possible under the circumstanses]. I mentioned to Tom this morning we need a few bonified unmolested originals to check seat springs to know for sure as possible[if it's possible!]]

----- ORIGINAL MESSAGE FOLLOWS -----
2 linkert carbs - 7/8" venturie. (M-16 early 4 line inscription, fresh rebuild-throttle shaft bushings,choke shaft bushed also! brass float, viton needle and seat, body painted black and all the rest cad plated-$400.00) M-7 "stamped Indian" fresh rebuid identical to the M-16 listed above EXCEPT- this carb is ready to be plated as it would have been in its day! Carb comes with Linkert air horn also-$400.00 Both carb are in excellent condition, you wont be disappointed!
1.KJ-5686 Brake cross shaft. Made from 1045 alloy and has 2 stainless taper pins - $40.00.

In reference to the seat spring saga-As Paul Harvey would say "And now for the REST of the story". The seat spring which Tom Fickau is using as a pattern came from me! This spring was taken from an original rusty seat bridge and BOTH spring were wound the same direction! Also before sending I looked at my Toney Watson springs on the other KJ which were purchased quite a few years ago and they also were wound in one direction! And you are all right - Tom was lived Friday at Oley!!!!!!!!!!!!!!